Hi, who flycuts VW heads? Ideally in the South East, West Sussex would be great.
Need to tripple-check my figures, but I think I'm going to need to get my new heads cut to reduce the chamber volume to get a decent compression ratio. At the moment, they're 54.75cc and, shimming the barrels to get 1mm deck height will give me a 7.5:1 compression ratio.
I've been advised that I'd be better running closer to 8.5:1
It's a 1600 dual port, stock cam and crank, single carb.
1 post • Page 1 of 1