Who flycuts heads?

Post Reply
User avatar

Topic Author
Who.Me?
SSVC Member
SSVC Member
Posts: 1014
Joined: Thu May 15, 2014 8:13 pm
Location: West Sussex

Who flycuts heads?

Post by Who.Me? » Fri Feb 14, 2020 10:32 pm

Hi, who flycuts VW heads? Ideally in the South East, West Sussex would be great.

Need to tripple-check my figures, but I think I'm going to need to get my new heads cut to reduce the chamber volume to get a decent compression ratio. At the moment, they're 54.75cc and, shimming the barrels to get 1mm deck height will give me a 7.5:1 compression ratio.

I've been advised that I'd be better running closer to 8.5:1

It's a 1600 dual port, stock cam and crank, single carb.

Thanks

Andy

Post Reply