Split Screen Rear upper interior Corner Panels

Post Reply
passion4
SSVC Member
SSVC Member
Posts: 4568
Joined: Sun Mar 07, 2004 3:31 pm
Location: Hastings, East Sussex... yep, that's 5 mins walk to the sea! :-)
Contact:

Split Screen Rear upper interior Corner Panels

Post by passion4 »

Anyone got any (large hatch) Split Screen Rear upper interior Corner Panels that are no longer needed? Open on condition, or even if it is just a single panel rather than a pair. WHYG…
‘impossible just shows a lack of imagination’

vdubxs
Aircooled Adventures

exclusive VW Split Screen T-Shirts and bumper stickers for sale… (and Schwimmwagen ones too!)

El torro
Registered user
Posts: 72
Joined: Thu Aug 10, 2017 8:54 pm

Re: Split Screen Rear upper interior Corner Panels

Post by El torro »

I have one ,I used it as a template to make both corners out of 3mm ply,with a lot of help from friend,mill board would have been easier,I can email photo,yours for postage only ,or I could give you measurement,it's hrs looking from back,but other side is mirror image

passion4
SSVC Member
SSVC Member
Posts: 4568
Joined: Sun Mar 07, 2004 3:31 pm
Location: Hastings, East Sussex... yep, that's 5 mins walk to the sea! :-)
Contact:

Re: Split Screen Rear upper interior Corner Panels

Post by passion4 »

Thanks for the offer, but I’ve managed to find some that I could either use as templates to make new from…
‘impossible just shows a lack of imagination’

vdubxs
Aircooled Adventures

exclusive VW Split Screen T-Shirts and bumper stickers for sale… (and Schwimmwagen ones too!)

type21f
SSVC Member
SSVC Member
Posts: 15340
Joined: Tue May 29, 2007 12:55 pm
Location: West Yorkshire

Re: Split Screen Rear upper interior Corner Panels

Post by type21f »

I have seen these made from Foamex Art board and covered in paper based Portabin style material. I blagged a roll but have yet to attempt. Was the ply too rigid?
Foamex can be formed with a heat gun so was ideal for making a drinks tray ftont panel. Once cooled it retained shape very well.
I aim to make a set of narrow hatch ones and was considering the alternatives of millboard Foamex or ply!

1965 Type21f
Westfalia Hamburg Type155i 003 viewtopic.php?f=8&t=64012
1965 Devon Caravette, L360 L289 Hammock, Tent, M W Pop
Image
Peebles 1964 Devon Caravette Gentlux Pop

philsparks
SSVC Member
SSVC Member
Posts: 322
Joined: Wed May 21, 2014 7:55 pm
Location: new forset

Re: Split Screen Rear upper interior Corner Panels

Post by philsparks »

I am looking for the measurements or a template, I tried 3.6mm white hardboard it is just about possible to get it in.
If you can post up the template that would be great.

I can't find a reproduction set to buy?

Phil

Sent from my HRY-LX1 using Tapatalk


passion4
SSVC Member
SSVC Member
Posts: 4568
Joined: Sun Mar 07, 2004 3:31 pm
Location: Hastings, East Sussex... yep, that's 5 mins walk to the sea! :-)
Contact:

Re: Split Screen Rear upper interior Corner Panels

Post by passion4 »

These are supposed to be good so I’ve heard? https://www.madmatz.co.uk/abs-trim-panels.html
‘impossible just shows a lack of imagination’

vdubxs
Aircooled Adventures

exclusive VW Split Screen T-Shirts and bumper stickers for sale… (and Schwimmwagen ones too!)

philsparks
SSVC Member
SSVC Member
Posts: 322
Joined: Wed May 21, 2014 7:55 pm
Location: new forset

Re: Split Screen Rear upper interior Corner Panels

Post by philsparks »

They seem to only do the lower rear panel not the top quarter panel.

Ta Phil

Sent from my HRY-LX1 using Tapatalk


passion4
SSVC Member
SSVC Member
Posts: 4568
Joined: Sun Mar 07, 2004 3:31 pm
Location: Hastings, East Sussex... yep, that's 5 mins walk to the sea! :-)
Contact:

Re: Split Screen Rear upper interior Corner Panels

Post by passion4 »

They’re listed together, you select which one you want… https://www.madmatz.co.uk/split-screen- ... anels.html
‘impossible just shows a lack of imagination’

vdubxs
Aircooled Adventures

exclusive VW Split Screen T-Shirts and bumper stickers for sale… (and Schwimmwagen ones too!)

philsparks
SSVC Member
SSVC Member
Posts: 322
Joined: Wed May 21, 2014 7:55 pm
Location: new forset

Re: Split Screen Rear upper interior Corner Panels

Post by philsparks »

Thanks, sorry should have looked further,

Cheers Phil

Sent from my HRY-LX1 using Tapatalk


Post Reply